ds13003 rev. 8 - 3 1 of 3 sk12-sk16 www.diodes.com diodes incorporated sk12 - sk16 surface mount schottky barrier rectifier features maximum ratings and electrical characteristics characteristic symbol sk12 sk13 sk14 sk15 sk16 units maximum recurrent peak reverse voltage v rrm 20 30 40 50 60 v maximum rms voltage v rms 14 21 28 35 42 v maximum dc blocking voltage v dc 20 30 40 50 60 v maximum average forward rectified current @ t a = 75 c i (av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 25 a maximum instantaneous forward voltage at 1.0a v f 0.55 0.70 v maximum dc reverse current at rated @ t a = 25 c dc blocking voltage @ t a = 100 c i r 0.5 10 ma maximum full load reverse current full cycle average @ t a = 75 c i r 5ma maximumthermal resistance (see note 1) r jl 25 c/w typical total capacitance (see note 2) c t 110 pf operating temperature range t j -65 to +125 c storage temperature range t stg -65 to +150 c ratings at 25 c ambient temperature unless otherwise specified. single phase, halfwave, 60hz resistive or inductive load. a b c d g h e j notes: 1. thermal resistance from junction to lead. 2. measured at 1.0mhz and applied reverse voltage of 4.0v. 3. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7 . smb dim min max a 3.30 3.94 b 4.00 4.65 c 1.95 2.21 d 0.15 0.40 e 5.00 6.00 g 0.10 0.20 h 0.76 1.52 j 2.00 2.62 all dimensions in mm case: smb case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c also available in lead free plating (matte tin finish). please see ordering information, note 5, on page 3 terminals: solderable per mil-std-202, method 208 polarity: cathode band or notch approx. weight: 0.093 grams mechanical data for surface mounted applications high temperature metallurgically bonded contacts capable of meeting environmental standards of mil-std-19500 high reliability submersible temperature of 265 c for 10 seconds in solder bath available in lead free finish/rohs compliant version (note 3) not recommended for new designs - use b1x0b series
ds13003 rev. 8 - 3 2 of 3 sk12-sk16 www.diodes.com 1.0 0.8 0.6 0.4 0.2 0 40 60 80 100 120 140 160 180 t , ambient temperature (oc) fig. 1, forward current derating curve a i , average o utput current (a) av single phase half-wave 60 hz resistive or inductive load 6.0mm copper pads 2 1 10 100 0 5 10 15 20 25 number of cycles @ 60 hz fig. 4, max non-repetitive peak forward surge curren t i , peak f o rward surge current (a) fsm 8.3ms single half sine-wave jedec method 0.1 1.0 10 100 10 100 400 v , reverse voltage (volts) fig. 3, typical total capacitance r c,t o tal capacitance (pf) t t = 25oc f = 1.0mhz j 0.1 0.5 0.9 1.3 1.7 2.1 0.01 0.1 1.0 4.0 v instantaneous forward voltage (v) fi g .2, t y pical forward characteristics f i , instantaneous forward current (a) f t = 25oc pulse width = 300 ms 2% duty cycle j sk12-14 sk15-16 not recommended for new designs - use b1x0b series
ds13003 rev. 8 - 3 3 of 3 sk12-sk16 www.diodes.com not recommended for new designs - use b1x0b series device packaging shipping sk12-13 smb 3000/tape & reel sk13-13 smb 3000/tape & reel sk14-13 smb 3000/tape & reel sk15-13 smb 3000/tape & reel sk16-13 smb 3000/tape & reel ordering information notes: 4. for packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 5. for lead free finish; rohs compliant version part numbers, please add "-f" suffix to the part numbers above. example: sk14- 13-f. (note 4)
|
